Emergency and safety lighting

Lipapromet’s role – from equipment selection to project documentation

For many years, Lipapromet has offered a complete range of emergency (anti-panic) lighting – fluorescent and LED luminaires, accessories, and control and monitoring devices.

The range includes:

  • emergency luminaires for marking escape routes (e.g. the HELIOS series)
  • compact LED emergency luminaires with high technical performance (e.g. the Beghelli UP LED line)
  • emergency luminaires with different IP ratings and autonomy times, such as LOVATO N and LOVATO P

But Lipapromet’s key value is not just the distribution of equipment – it is our project and engineering approach: from defining the concept and carrying out lighting calculations to implementing advanced monitoring and central power supply systems.

Project approach: from emergency lighting concept to installation

For every emergency lighting project, Lipapromet’s design team:

  1. Analyses the building type and the use of the spaces
    – public buildings, shopping centres, industry, schools, hospitals, car parks, hotels, office buildings, etc.
  2. Defines the zones in accordance with EN 1838:
    – escape route lighting
    – anti-panic zones in larger open areas
    – local safety lighting in specific areas (e.g. boiler rooms, technical rooms).
  3. Calculates illuminance and autonomy
    – at least 1 lx on the escape route with defined uniformity
    – calculation of operating duration (1 h / 3 h / 8 h) depending on project and regulatory requirements.
  4. Selects the system concept
    – self-contained luminaires with their own battery
    – centrally supplied system (central battery system)
    – hybrid solutions for large and complex buildings.
  5. Prepares the technical documentation
    – floor plans with luminaire and sign positions
    – technical specifications and power supply diagrams
    – documentation for technical and fire safety inspections.

Advanced AWEX systems – central power supply and monitoring

For more demanding buildings – such as hospitals, shopping centres, industrial plants, large car parks or campuses – Lipapromet uses AWEX central power supply and monitoring systems for emergency lighting.

Central battery systems (CBS, FZLV / FZLV II)

AWEX central battery systems are high-tech solutions that:

  • supply dozens or hundreds of emergency luminaires from a single central unit
  • allow luminaires to operate in different modes (non-maintained, maintained, combined) and by zone
  • operate at SELV voltage (e.g. 48 V DC), increasing operational safety and compliance with regulations for special locations.

Central units such as the AWEX CBS / FZLV are equipped with:

  • a controller that monitors the operation of the entire system
  • an integrated intelligent charger that monitors and protects the batteries
  • event and status logging (fault logs, tests, alarms)
  • the option to distribute power by fire zones and separate circuits.

Such systems significantly reduce the need to service each luminaire individually and enable centralised maintenance.

Monitoring systems – automatic testing and diagnostics

AWEX monitoring systems enable:

  • monitoring of individual luminaires or circuits via communication lines
  • periodic automatic function and duration tests (e.g. monthly/annual)
  • early detection of faults, loss of battery capacity and communication problems
  • reporting through a central monitoring unit (often with a touch screen) and integration into the BMS.

This approach follows the “compliance by design” trend: the system itself proves that it is working and compliant, with automatic test records – increasingly required by inspectors and users.

Project collaboration and consulting for investors

As with general lighting and intelligent installations, in the field of emergency and safety lighting Lipapromet:

  • works with electrical designers on preliminary and detailed designs
  • works with architects to coordinate positions, aesthetics and integration into the space
  • provides direct consulting for investors – on the choice of concept (self-contained vs. central), life-cycle cost, maintenance and future upgrades.

In this way, emergency lighting is not an “afterthought”, but part of a complete electrical and lighting solution from day one.

Conclusion: emergency lighting as a system, not just a luminaire

For Lipapromet, emergency and safety lighting is a complete system:

  • based on standards and regulations
  • supported by luminaires from renowned manufacturers
  • integrated into advanced AWEX central and monitoring systems
  • designed to make life easier for users, maintenance staff and inspection authorities.

This achieves what ultimately matters most:
safe evacuation, controlled risk and reliable operation of the building at the most critical moments.

Contact us

To help us give you the best possible answer, please state your question clearly. Interested in a product? Price? Availability? Need a professional lighting design for your project? We will reply as quickly as possible.